Amp-Trap 2000® A4BQ fuses are 20% more current-limiting than any
other Class L fuse on the market. When correctly coordinated, they
bring a superior level of protection to service entrance equipment.
Downstream circuit components have maximum protection against
short circuit let-thru current. A4BQ’s built-in, 4-second time-delay
characteristic (at 500% of rated current) accommodates harmless
inrush currents without nuisance opening.
FUSIBLE A2D-R - Class RK1 - Time-Delay
Amp-Trap 2000 SmartSpot time-delay A2D-R fuses provide IEC Type 2 «no damage» protection to existing mains, feeders, and branch circuits serving motor and non-motor loads. A2D-R fuses will open fast enough under extreme fault conditions for maximum short circuit protection to prevent damage to motor starters, switches, and other circuit components, yet also provide the time-delay needed for motor in-rush currents. A2D-R fuses can be used to replace obsolete 250V Class H, K or RK5 fuses already installed in the field.
Fusible ATQR Time-delay/ Class CC
ATQR small-dimension fuses feature time-delay characteristics ideally suited for the high inrush currents of control transformers, solenoids, and similar inductive loads. Mersen’s Amp-Trap 2000 ATQR fuses provide superior protection for the branch circuits of electrical distribution systems.
Fusible MOTOR PROTECTION Amp-Trap Bolt-In Series 5.08KV/7.2KV
• The Amp-Trap Bolt-in series are UL Recognized.
• Bolt-in mounting for direct connection to bus or terminals.
• Current-limiting for superior equipment protection.
• Metal embossed catalog number and manufacturing date for lasting identification.
• Blown-fuse indicator to give positive identification of open fuse.
Amp-Trap: 3” Barrel 2 lb tripped force – 0.50 Inch
Fusible Class C Canadian Fuses
Ferraz Shawmut Class C fuses have British standard
(BS88) dimensions and are exact replacements for
the British fuses and older HRCII-C fuses. Class C fuses are not dimensionally or electrically interchangeable with other North American fuses.
They feature ceramic bodies and bolt-in mounting.
They are for short-circuit protection only, in motor controllers, for example, where overload protection is provided by an overload relay.
ver
Fusible A70QS Amp-Trap Form 101
A70QS Amp-trap Semiconductor Protection fuses were developed in response to the need for improved overall performance of 700 volt semiconductor fuses for new equipment requirements. A70QS fuses have lower I²t for better protection, longer life when subjected to cyclic loading, plus lower watts loss. A70QS is the best choice to protect dynamic solid state equipment such as motor drives, UPS, etc.
ver
Fusible HSJ - Class J - High-Speed
The High Speed Class J (HSJ) combines the low I2t of a semiconductor fuse and the branch-circuit performance of a Class J UL Listed fuse into a single design. The HSJ can provide both branch circuit protection per NEC requirements, as well as very low I2t for protection of power semiconductors such as Diodes, SCRs, GTOs and SSRs.
Multi-meter fuses 10x35/10x38 FSM 1000V
Mersen has developed a true 1000VAC/DC fuse designed to protect both analog and digital multi-meters. These fuses cover all the industry’s multi-meter requirements in three easy to use amperage ratings. Good for 1000 volts AC and DC, the FSM line of Ferraz Shawmut fuses are designed for the power electronics metering and controls market.
OT, OTN and OTS fuses are not rejection fuses -care should be taken to ensure that replacement fuses do not have lower interrupting ratings than
original fuses.
OTN 15 through 60 satisfy the Canadian electrical code requirement for Type «P» low melting-point, non-time delay fuses.
ver
Fusible 6,9 grb-URB din German estándar
• Extremely high interrupting rating
• Protection of power semiconductors according to IEC 269.1 and EN 60269.4
• 500-690V [Rating 20 to 400A]
• gR class [gRB Ratings 20 to 125A] according to VDE 636-23
-Full range protection
-Improved safety and protection
-Allows selective coordination
• aR class [current rating 80 to 400A] according to VDE 636-23 and IEC 269.4
• 3 models complying with DIN 43653-00C are:
-With or without blown fuse indication
-With trip indicator
• Model complying with DIN 43620 (00C)
-Standard with or without blown fuse indication
-With trip indicator
Spanish
English
Valoraciones
No hay valoraciones aún.