Ferraz Shawmut Class C fuses have British standard
(BS88) dimensions and are exact replacements for
the British fuses and older HRCII-C fuses. Class C fuses are not dimensionally or electrically interchangeable with other North American fuses.
They feature ceramic bodies and bolt-in mounting.
They are for short-circuit protection only, in motor controllers, for example, where overload protection is provided by an overload relay.
ver
Fusible TRS-R - Class RK5 - Time-Delay
Tri-Onic TRS-R current-limiting time-delay fuses are engineered for overcurrent protection of motors, transformers, service entrance equipment, feeders and branch-circuits. The time-delay characteristics of the TRS-R safely handle harmless starting currents and inrush currents associated with today’s motors and transformers.
ver
Fusible A70QS French Cylindrical
These Premium Amp-trap French Cylindrical Semiconductor Fuses are an extension of the popular A70QS product line. They are solid-fill 14mm and 22mm fuses IEC rated 690VAC, 200kA Interrupting and 700VDC, 100kA interrupting at 10ms time constant. In addition, these fuses have an 890 VDC rating for capacitor discharge applications up to 2.5ms time constant. All ampere ratings are available with a striker. Applications include small inverter drives and UPS systems, with superior I²t for improved protection and performance.
ver
Fusible URGG/URGH British standart
• Extremely high-Interrupting rating fuses
• Protection of power semiconductors according to IEC 269.1 and 4
• aR class (ratings from 50 to 525A URGG – 300 to 1050A URGH)
according to IEC 269.4
• Complies with BS 88-4
– without indicator
– with external trip-indicator
Fusible AJT Time-delay/ Class JAmp-Trap 2000
Los fusibles AJT con retardo de tiempo Amp-Trap 2000 brindan protección IEC tipo «2» (sin daños) a los circuitos principal, alimentador y de derivación, para todos los tipos de cargas; sin embargo, requieren solo la mitad del espacio de montaje necesario para 600V UL Class Fusibles RK. Las características de retardo de tiempo manejan las corrientes de entrada del motor sin disparos molestos. Su capacidad de limitación de corriente y su amplio rango de calificaciones brindan una excelente protección contra sobrecorriente para todas sus aplicaciones. Un indicador opcional de fusible fundido y un microinterruptor está disponible en los fusibles tipo cuchilla (70 a 600 A) para una indicación visual y / o remota de fusible fundido.
FUSIBLE A2D-R - Class RK1 - Time-Delay
Amp-Trap 2000 SmartSpot time-delay A2D-R fuses provide IEC Type 2 «no damage» protection to existing mains, feeders, and branch circuits serving motor and non-motor loads. A2D-R fuses will open fast enough under extreme fault conditions for maximum short circuit protection to prevent damage to motor starters, switches, and other circuit components, yet also provide the time-delay needed for motor in-rush currents. A2D-R fuses can be used to replace obsolete 250V Class H, K or RK5 fuses already installed in the field.
OT, OTN and OTS fuses are not rejection fuses -care should be taken to ensure that replacement fuses do not have lower interrupting ratings than
original fuses.
OTN 15 through 60 satisfy the Canadian electrical code requirement for Type «P» low melting-point, non-time delay fuses.
ver
Fusible 6,9 grb-URB European Semiconductor
• Extremely high Interrupting rating
• Protection of power semiconductors as per IEC standard 269.4
• 690V rating as per IEC 33
• gR class [current rating 12 to 90A] as per VDE 636-23
-Full range protection
-Improved safety and protection
-Allows selective coordination
• aR class [current rating 100A] according to VDE 636-23 and IEC 269.4
• Connections as per:
-German Standard DIN 43653/00C
-British Standard BS 88-4
• These fuses are UL recognized
ver
Fusible ATQ Time- Delay Migdet
Amp-Trap ATQ midget time-delay fuses are rated 500VAC with 42 ampere ratings from 1/10 to 30A. They are an excellent choice for supplemental protection of circuits where the available short circuit current does not exceed 10,000A. (Not for Branch Circuit Protection)
ver
Multi-meter fuses 10x35/10x38 FSM 1000V
Mersen has developed a true 1000VAC/DC fuse designed to protect both analog and digital multi-meters. These fuses cover all the industry’s multi-meter requirements in three easy to use amperage ratings. Good for 1000 volts AC and DC, the FSM line of Ferraz Shawmut fuses are designed for the power electronics metering and controls market.
Spanish
English
Valoraciones
No hay valoraciones aún.