• High interrupting capacity
• Current limitation
• Blown-fuse indication
• Direct mount
• Clip style mount
• Bus mount
• Non-venting for silent operation
• Capacitor Protection
• Power Factor Correction
Equipment
• Harmonic Filtering Equipment
• Induction Heating System
• High Power Drive
• Welders
ver
FUSIBLE A2D-R - Class RK1 - Time-Delay
Amp-Trap 2000 SmartSpot time-delay A2D-R fuses provide IEC Type 2 «no damage» protection to existing mains, feeders, and branch circuits serving motor and non-motor loads. A2D-R fuses will open fast enough under extreme fault conditions for maximum short circuit protection to prevent damage to motor starters, switches, and other circuit components, yet also provide the time-delay needed for motor in-rush currents. A2D-R fuses can be used to replace obsolete 250V Class H, K or RK5 fuses already installed in the field.
Multi-meter fuses 10x35/10x38 FSM 1000V
Mersen has developed a true 1000VAC/DC fuse designed to protect both analog and digital multi-meters. These fuses cover all the industry’s multi-meter requirements in three easy to use amperage ratings. Good for 1000 volts AC and DC, the FSM line of Ferraz Shawmut fuses are designed for the power electronics metering and controls market.
Fusible A30QS Semiconductor Protection
A30QS Amp-trap Semiconductor Protection fuses are intended for the protection of Power Semiconductors such as Diodes, Phase Control SCR’s and other power Semiconductor devices. The A30QS is recommended for new applications providing solutions for your critical protection needs at 300V and less semiconductors.
ver
Fusible ATQ Time- Delay Migdet
Amp-Trap ATQ midget time-delay fuses are rated 500VAC with 42 ampere ratings from 1/10 to 30A. They are an excellent choice for supplemental protection of circuits where the available short circuit current does not exceed 10,000A. (Not for Branch Circuit Protection)
ver
Fusible 6,9 grb-URB European Semiconductor
• Extremely high Interrupting rating
• Protection of power semiconductors as per IEC standard 269.4
• 690V rating as per IEC 33
• gR class [current rating 12 to 90A] as per VDE 636-23
-Full range protection
-Improved safety and protection
-Allows selective coordination
• aR class [current rating 100A] according to VDE 636-23 and IEC 269.4
• Connections as per:
-German Standard DIN 43653/00C
-British Standard BS 88-4
• These fuses are UL recognized
ver
Fusible A70QS Amp-Trap Form 101
A70QS Amp-trap Semiconductor Protection fuses were developed in response to the need for improved overall performance of 700 volt semiconductor fuses for new equipment requirements. A70QS fuses have lower I²t for better protection, longer life when subjected to cyclic loading, plus lower watts loss. A70QS is the best choice to protect dynamic solid state equipment such as motor drives, UPS, etc.
ver
Fusible A70QS French Cylindrical
These Premium Amp-trap French Cylindrical Semiconductor Fuses are an extension of the popular A70QS product line. They are solid-fill 14mm and 22mm fuses IEC rated 690VAC, 200kA Interrupting and 700VDC, 100kA interrupting at 10ms time constant. In addition, these fuses have an 890 VDC rating for capacitor discharge applications up to 2.5ms time constant. All ampere ratings are available with a striker. Applications include small inverter drives and UPS systems, with superior I²t for improved protection and performance.
ver
Fusible ATMR - Class CC - Fast-Acting
Amp-Trap ATMR fast-acting fuses are the smallest dimension 600V fuses suitable for branch-circuit protection. The ATMR is a popular choice for economical protection of control circuits and control circuit transformers where available short circuit currents exceed 10,000 amperes. ATMR’s rejection dimensions prevent substitution by lesser rated fuses. These fast-acting fuses give current-limiting protection to general circuits.
ver
Fusible TRM - Midget - Time-Delay
Tri-Onic TRM time-delay midget fuses are rated 250VAC and are offered in 36 ampere ratings from 1/10A to 30A. They have 12 seconds time-delay at 200% rating to provide supplemental protection of small motors, small transformers and other high inrush loads, plus many other 250 volt applications. (Not for Branch Circuit Protection)
ver
Fusible TR-R & TRS-R Time delay/ Class RK5
Tri-Onic TRS-R current-limiting time-delay fuses are engineered for overcurrent protection of motors, transformers, service entrance equipment, feeders and branch-circuits. The time-delay characteristics of the TRS-R safely handle harmless starting currents and inrush currents associated with today’s motors and transformers.
Spanish
English
Valoraciones
No hay valoraciones aún.